machining ultem parts
ULTEM is also called PEI ,The exterior is amber and translucent. It
is better than PTFE (),Stronger hardness, good insulation and wear
resistance, has excellent machining performance.Generally, 10% or
30% glass fiber is added to increase hardness and wear
resistance.Usually ULTEM has three models,ULTEM1000,ULTEM2100
GF10,(10% glass fiber)ULTEM2300 GF30( 30% glass fiber)
Our machinable materaial
RuiXing precision Manufacturing, We can provide various CNC parts
made from all kinds of metal and plastic.
Aluminum CNC parts | 5052,6061,6063,6082,6262,2011,2017,2024,7075,5083,1050,etc | Rohs, SGS report |
Stainless steel CNC parts | SS303 304 A2 304L 321 316 316L 410 416 420 430 630 17-4PH 1.4301
1.4305 1.4306 1.4401 1.4435 1.454 Nitronic50, etc. | Rohs, Material certification |
Steel CNC parts | Mild steel, Carbon steel, 12L14, 1215, 1018,1045,Q235, XC38, XC48,
4140, 4340, 42CrMo4, 35MF6Pb, X30Cr13, Inconel 600, etc | Rohs, Material certification |
Brass Copper CNC parts | H59,CuZn39Pb3,H62,H85,C3604,C23000,CuW90/10,CW021A,C11000,101OFC,Bronze,
C93200,etc | Rohs, Material certification |
Plastic CNC parts | PC,POM,Acetal,Delrin,Nylon,PA, PA6+GF30, , PTFE,PVC, PMMA,
PEI,Ultem,PEEK,PE,HDPE,UHMWPE,PE1000,etc. | Rohs, Material certification |
Titanium Alloy CNC parts | tanium alloy Gr2, Gr5,Ti6Al4V,etc. | Material report |
Laser cutting parts | Stainless steel, Steel, Aluminum | |
Our surface finish
It can make the parts beautiful or bright. Also prevent from rusty
or anodizing in the air.
CNC aluminum parts | Sandblast and anodize,Brush,Hard anodize,Polish,Chrome plated,
Powder Coated, Surtec 650,Vacuum coating or PVD,etc | Thickness .005-0.05mm |
CNC Stainless steel parts | Polish, Brush, Passivation, Sandblast, Etching, PVD, plated etc | 0.003-0.020 |
CNC steel parts | Zinc, Nickel, Chrome plated,Oxide black,Chemical Nickel plated,
Powder Coated,Heat treatment, PVD, plated, etc | 0.003-0.020 |
CNC brass copper parts | Nickel, Chrome,Gold,Silver,Tin plated, Chemical Nickel plated,etc | As required |
CNC plastic parts | Painting, Powder coating, Polishing,etc | As required |
CNC Titanium alloy parts | Polish, Brush, Sandblast, Black, color, rainbow PVD, etc | As required |
In the process of machining UTLEM parts, the difficulty of
machining them is,ULTEM2300>ULTEM2100>ULTEM1000.
Machining Pei (ultem) is more difficult than PTFE because of its
high hardness.The wear resistance of ultem parts has higher
requirements for the cutting tools of CNC machining center.We have
calculated that after 3.5 hours of machining ultem, the tool wear
is 0.03mm,Therefore, the parameters of machining center should be
modified to compensate the tool wear size.
Of course, it is a good way to divide machining Pei into two steps.
Rough machining and micro machining.Generally, engineers will
reserve 0.5mm machining allowance for micro machining.
It is worth noting that in machining ULTME parts, the stress
rupture of the non crystalline plastic structure in ULTEM may be
caused, so the CNC machining center should use spray and compressed
air as cooling.
Ruiyihang technology has 32 CNC machining centers, 18 CNC turning
centers, and advanced machines such as precision milling machines,
grinders and laser cutting machines, which can complete milling,
boring, turning, grinding, slotting, drilling and tapping. With
more than 12 years of experience in machining utlem, an efficient
team can provide samples within one week at the fastest.
